Tutorial

P1000604How to apply Super Shine S1!
STEP:
1) Make sure car is clean. Spray clean water (mild wet)
onto size of half bonnet.
2) Squeeze 2 to 3 times S1 onto a mild wet soft sponge,
apply evenly onto bonnet, wipe off residue with mild
wet microfiber towel.
3) Repeat step 2 on the other half bonnet, and dry bonnet
completely with a new dry microfiber towel to check
finishing. You may add a new layer for a better coverage
by repeating step 2.
4) Note that for better effect use 1 or more microfiber
towel to dry your car completely.
5) Super Shine coat S1 (100ml) are concentrated. It’s
designed for 2 coating. Apply second coating 30days
after first coating.
6) Do not wash car for 3 days after applying S1. Suggest
using S1 x3 for extra coat protection for rainy season
and after car wash. It prolongs car shine 3 times more.
7) Do not apply under hot sun or heated car body or dusty
place.
8) Shake well before use.

Safety:
1) Store in cool dry areas. Keep out of reach of children.
2) If swallowed, seek medical attention immediately.
3) If contacted with eyes rinse plenty of water and seek
medical advice if irritation persists.

P1000603How to apply Super Shine S3?
STEP:
1) Wash car thoroughly, do not dry cars.
2) S3 are designed to apply while cars are in mild wet or
wet condition.
3) Spray 2 to 3 times S3 concentrate onto mild wet soft
sponge; apply evenly onto bonnet (spray some water
onto the bonnet if the surface is dry). Note: 2 to 3 times
spray are sufficient to apply half the bonnet. Use slightly
wet microfiber towel to wipe off residue. Wipe dry with
another completely dry microfiber towel.
4) Complete step 3 on each portion coated. Repeat same
step till the car’s surface are entirely coated.
5) If residue mark appears on surface, rinse surface with
clean water or wet towel till residue disappear. Note: to
check finished work, car surface must be completely dry.
6) Do not apply directly under hot sun or heated car body
or any dusty area.
7) Apply S3 for 1 to 2 times a week whenever after car
wash

Safety:
1) Store in cool dry areas. Keep out of reach of children.
2) If swallowed, seek medical attention immediately.
3) If contacted with eyes rinse plenty of water and seek
medical advice if irritation persists.

How to use a clay block?
Step:
1. Wash car thoroughly
2. Finger press clay block into palm shape.
3. Spray clean water onto half bonnet size, move clay block
left, right and to & fro motion with very light pressure.
Feel the rubbed surface regularly and move to next
portion if surface becomes smooth. Note: clay residue
maybe sticking on the paint surface due to insufficient
of water. Spray more water and rub to lift residue.
4. Repeat step 3 till car body is thoroughly clayed.
5. Note: Check clay regularly, fold the clay and repeat step
2 whenever it turn dirty.
6. If accidentally drop onto floor, make sure to remove a
thin layer off from the clay with finger picking. This is to
avoid particle that stick on the clay may cause scratches
to paintwork.
7. Store clay in container provided; fill with half full clean
water. (Suggest adding little cleaning agent), close cover
firmly.
8. Do not use clay direct under sunlight or heated car body.
9. Keep clay in room temperature. Keep out of reach of
children.

Super Shine S1
使用方法 :
1) 确保车身表面清洁后,用清水弄湿引擎盖的其中一半。
2) 使用前,先把 Super Shine Coat S1 (100 毫升)搖勻。小心地将 Super Shine
Coat S1 挤出 2 至 3 下到一块微湿的软海绵。用海绵在引擎盖上以打圈的方式慢慢进
行打蜡。用微湿的微纤维抹布抹除所有殘留物。
3) 把引擎盖的另一半按照第 1 及第 2 步的方法來进行清洁。随后用一块新的干纤维抹
布把引擎盖完全抹干,並检查是否已打蜡妥当。
4) 把车身表面的其他部分按照第 1 至 3 步的方法來进行打蜡。要获得理想的效果,请
使用至少一块干纤维抹布把车身徹底抹净。
5) Super Shine Coat S1 乃高度浓缩配方,特別适合于进行两次使用。建议在第一次
打蜡的 30 天后进行第二次打蜡。
6) 在使用 Super Shine Coat S1 之后的三天内,请不要清洗您的轿车。
7) 注意 :请不要在汽车受熱的情况下使用 Super Shine Coat S1。不要在日晒及多
尘的环境里使用本产品。
8) 若欲获得更佳的防护效果,可在雨季期间或洗车后使用 Super Shine Coat S1,
您的轿车将会比平時闪亮多达三倍以上。

安全使用说明:
1)请将本产品存放在阴凉干燥的地方,防止儿童接触。
2)如果误吞,请立即就医。
3)如果产品接触了眼睛,立即用大量的清水冲洗眼睛,若刺激持续,请即刻就医

如何使用 Super Shine S3?
步驟
1) 把車身表面徹底清洁乾淨,但不要弄乾。
2) 使用 S3 前,需把車身噴潤。
3) 将 Super Shine Coat S3 濃縮清潔液噴出 2 至 3 次到一块微湿的软
海绵上,並均勻地把保護層拭擦在引擎盖上(若表面太干請則需噴多點
水)。注意 :噴 2-3 下可足夠清潔引擎盖的一半。用微湿的微纤维抹布
抹除所有殘留物,之後用另一塊干的微纤维抹布把車身完全抹干。
4) 在其他已塗上保护层的車身部分重復第 3 步,直至整個車身都被塗
上保护层。
5) 如發現汽車表面上仍殘留著污跡,可用清水或濕布把其清除。注意 :
進行檢查前必須確保車身完全乾透。
6) 不要在直接日曬、汽车受熱或多尘的情況下使用本產品。
7) 每次洗車後,建議每星期使用 S3 1 到 2 次。
安全使用说明:
1)请将本产品存放在阴凉干燥的地方,防止儿童接触。
2)如果误吞,请立即就医。
3)如果产品接触了眼睛,立即用大量的清水冲洗眼睛,若刺激持续,请
即刻就医。

Super Shine Clay Block
使用方法 :
1. 把车身徹底清洗乾淨。
2. 用手指把粘土塊捏成手掌狀。
3. 用清水噴湿引擎盖的其中一半,用輕微的壓力把粘土壓在
車身上並上下左右來回拭擦。時常檢查已拭擦過的表面,
若對其滑溜及洁亮程度滿意,則可拭擦其他部位。注意:
水份不足時,粘土可能會殘留在油漆層上。此時可再噴水
並以抹擦的方式移除殘留物。
4. 重復第 3 步直至整個車身完全粘土覆蓋。
5. 注意:定時檢查粘土,若發現變得骯髒可把粘土對接然後重
復第 2 個步驟。
6. 若不小心粘土給掉在地上,必須用手指刮走粘土最外面的
一層,以確保粘土上沒有任何能刮花油漆表面的粒狀物。
7. 把粘土存放在提供的容器内,在其内注入清水至一半並關
緊瓶蓋。(建議加入一點清潔劑)
8.请不要在汽车受熱、直接日晒及多尘的环境下使用 Super
Shine Coat S1。
9. 请将本产品存放在阴凉干燥的地方,防止儿童接触。